Best garden lights provider: Rust prevention of LED street light poles: The problem of rust prevention of street lamp poles is also very important. The main methods are hot-dip galvanizing, cold galvanizing, and plastic spraying. Hot-dip galvanizing is recommended. This can prevent serious corrosion of the exterior of the light pole, and can make the street light use for a longer time. The waterproofing of LED street lights directly affects the service life of street lights. In order to avoid additional maintenance work and high maintenance costs in the later period, we must pay special attention to the waterproof problem of the lamps. The first thing to do is to find a manufacturer with a good reputation and good after-sales service to eliminate unnecessary problems and troubles in the product.
The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment. Find extra info on https://www.chz-lighting.com/garden-lighting.
The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.
CHZ Lighting is the leading LED street light manufacturer in China, offering professional LED lighting fixture solutions for muliti applications and environments. Our main products include road lighting, garden lighting, solar lighting, LED flood light, stadium lighting, industrial plant lighting, warehouse lighting, etc. CHZ is a professional LED street light manufacturer, LED flood light factory and lighting solution provider for over 12 years. We adhere to the high standards of “Technological Innovation, Consistent Quality”, continuously developing new products.
Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.
Enclosure: Using efficient Fishbone radiator with elegant appearance. The die-cast aluminum housing is electrostatically sprayed, sprayed with a polyester powder coating, treated with an anti-corrosive primer, and cured in a 180oC oven. Cable: Using silicone rubber cable for safe and efficient power input. It is secured in the cable gland with screws. Warranty: 5 year warranty for the entire lamp. Do not attempt to disassemble the casing as this will break the seal and invalidate all warranties. Certificates: ENEC, TUV, and RoHS. Quality Control: Strict testings including high and low temperature testing, waterproof testing, shock testing, aging testing, tensile testing, salt spray testing, are conducted to ensure long-term performance. Read more info at https://www.chz-lighting.com/.
Most LED street lights are installed with a solar panel that helps in generating backup power hence reducing the operational costs incurred. In other words, instead of using electricity, most manufacturers install a solar panel in the lighting system to provide the required energy. Such lights have some added advantages, especially those that operate in areas that experience at least 10 hours of sunlight. The light source usually recharges its batteries and uses the energy to provide light at night. Such a system is paramount in ensuring that the street light illuminates an area throughout the year.