Plastic cable glands and PG cable glands online shopping? Our watertight fittings for the rail sector – the WADI-BN fittings – are for the entry of electric cables inside railway compartments and between carriages, in air-conditioning systems, in traction motor engineering and in signal boxes. As in all industries, the WADI-BN must also meet extensive safety standards in order, for instance, to prevent cable fires. The most important of these are the requirements of the global players in the train industry, stipulated in the DIN EN 45545 and NF F 16-601 standards, among others.
Metal cable glands are used in a range of applications, including the chemical industry, technology and areas with high demands on special mechanical and chemical stability. The pros are durability over time, even in wet conditions, and its rigid stability. Plastic cable glands have a wide cable range due to their claw and seal design, which makes them extremely adaptable to a wide range of applications. The pros are resistance to salt water, grease and weak acids, to name a few.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Aerospace cable glands: Designed and rated for use on aircraft or space vehicles and/or equipment; may include applicable approvals for military and/or aircraft use. Read extra details on PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
Is There a British Standard for Cable Glands? The Code of Practice for selection, installation and inspection of cable glands used in electrical installations is covered in BS 6121-5 1989 Mechanical cable glands. Selecting Cable Glands – Items to consider when selecting a cable gland for a particular installation include: Possibility of electrolytic action between the gland and the enclosure. Shortened lifetime for the glands and the cable entries can result if incompatible materials are selected. The most common materials used are brass, stainless steel and plastic. Material choice will influence cost.
CableGlandsOnline.com is a leading manufacturer of cable glands located in Mongkok, Kowloon, Hong Kong. Because of our good production management and large volume we are able to sell you the best cable glands at competitive prices. CableGlandsOnline.com is your cable glands online warehouse, just a click away. Source: this website.