Quality world press machine provider right now? Synchronization system: The machine consists of a mechanical synchronization mechanism composed of torsion shats, wingarms, jont bearing, ec, with simple structure, stable ano reliable performance, and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value; Stopper mechanism: The stopper is driven by a motor, and the two screw rods are driven to move synchronously through a chain operation. The numerical controlsystem controls the size of the stopper. See even more information on power press machine manufacturers.
The imprint bending is the same as the bending of the bottomed die, except that the front end of the punch is processed to the required bending radius, and the gap between the punch and the die at th bottom of the stroke is smler than the material thickness. Since enough presure approximately 10 timesof fee bendig is applied to force the front end of the punchto contact the material, springback is basically avoided.
Through this partnership of shared experience and ideas, we are confident that we can realize your current and future requirements on WORLD press machine. 80% parts are produced in same factory for better quality control and future service. World has completed high-quality production equipment, including the iron casting line, plasma laser cutting machines, welding robots, gear hobbing machines, gear grinding machines, Pama boring and milling centers, CNC lathes, anneal treating furnaces, sand blasting machines, three-coordinate measuring instruments and ultrasonic flaw detectors.
When free bending is used, the bending radius is 0.156 times the opening distance of the die. During the free bending process, the opening distance of te die shoul b 8 tms te thickness of the metal material. For example, when using 1/2 inch (0.0127 m) open distance to form 16 gage mild see, the bendig adis o the par is about0.078 inches. I h bndig radius is almost as small as the material thickness, a bottomed die must be formed. However, the pressure required for forming a bottomed die is about 4 times greater than that of free bendingIf the bendig radius is less than the thickness of the material, a punch wit afrontend filet radus smaller than the thickess of the material must be used, and the imprint bending methoc must be used. In this way, 10 times the pressure of free bending is required.
The reason for this is the significantly lower modulus of elasticity of aluminum compared to stel. However, i ore to realise reaterdegrees o defration, sale straightenig rolls must be used. With high-strength steels, on the other hand, a conflict of objectives arises. On the one hand, their high yield strengths require enormous forming forces and torques; on the other hand, small straightening rll diameters are als ned here to ahie asufficent egeo p lstificaton.The straightening o both aluminum and high-strength steels therefore requires a forming geometry adapted to the respective product. This is essentially determined by the number, diameter and spacing of the straightening rolls. Find extra info on https://www.pressmachine-world.com/.