Woodworking machinery supplier in China: Professional woodworking machinery is designed purposefully to ensure users get a variety of desired outcomes. We also followed the same strategy to come up with the best products manufactured by V-Hold. We assessed all the products carefully so you will have to look any further or face any unforeseen issues. Reviewed products carry features that you should have whatever product you are choosing. V-Hold is an experienced manufacturer with decades of experience in the field. Their adherence to safety and quality standards are the glimpses you are likely to buy product needs and preferences accordingly. This blog is an effort to help you reach an informed decision. Hope you will get the assistance from these products you need so you make an informed decision. In case of any queries or anything about the product you need to know, use email, phone, WhatsApp, etc. modes to get the necessary information. Read more info on woodworking machinery.
Table and Belt Sander: The stationary belt sander uses a closed loop of paper that travels at speed around a pair of cylindrical drums. One drum is driven by an electric motor, the other is spring-loaded to maintain belt tension. Powered by the same motor, the stationery disk sander uses sanding disks that spin on a backing plate. On both the belt and disk sanders the work-piece is presented to the tool (the opposite is true of portable belt and hand held disk sanders which are presented to the work) on stationary sanders, an adjustable worktable or fence can be fixed in front of the sander to position the work-piece during sanding. Re-saws are a type of band saw specifically designed to cut large sections of timber into smaller sections. Some re-saws can also be used to cut thick veneers making them a popular choice for the manufacturer of engineered wood flooring.
A typical hydraulic down-acting press uses a pair of hydraulic cylinders, one on each end, to generate the tonnage required for the down stroke of the machine. Traditionally, these machines have a C or O frame profile design. With both types, when facing the front of the machine the hydraulic cylinders are located on the left and right hand side of the upper beam. Since the upper beam is being pushed down and up with hydraulic power, the upper beam will fall during a power outage and could create an unsafe environment. Down acting presses are commonly blocked at night to take pressure off of the hydraulic system. The lower beam does not move during bending so the operator will not get feedback that the brake is engaged.
The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Read more details on https://www.v-holdmachinery.com/.
The next woodworking machines is wood planer which is designed for planing large and heavy stock at a comparatively faster rate. The boards to be planed are fed by means of feed rolls along a table against a revolving cutter head. The cutter head is mounted on an overhead shaft which is adjustable for regulating the depth of cut . The table of the planer is much wider and longer than that of a jointer for accommodating large and heavy stock.
The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator.
The woodworking lathe is one of the most important machines used in a carpentry shop. This is employed primarily for turning jobs in making cylindrical parts. However, by suitably manipulating the tools, tapers, radii, and other irregular shapes can also be easily turned. It resembles the engine lathe most frequently used in the machine shop, and consists of a cast iron bed, a head stock, tail stock, tool rest, live and dead centers, and a speed control device (Fig. 10.54). The drive, in modern lathes, is individual motor driven ; and a cone pully on the head stock spindle is connected by a belt to a cone pully on the motor shaft.
Situated in Lunjiao town, Shunde district of Foshan city, the biggest woodworking machinery production base as well as “the Chinese leading woodworking machinery town”, V-HOLD woodworking machinery manufacture Co.,Ltd is a large well-known company integrated woodworking machinery research, processing, marketing as well as application service. We have one year warranty lifetime maintenance service. 2. For any technical problems you can contact us immediately. We have overseas repair and On-going Technical Support.