High quality ultrasonic fuel level sensor online shopping? The Displacer level controller changes the magnetic float to a float. Displacer level transmitter uses tiny metal film strain sensing technology to measure liquid level, interface or density. Such as Fisher DLC3010 Digital Level Controller. The hydrostatic level controller works by using the measuring principle of hydrostatic pressure. Generally, a silicon pressure sensor is used to convert the measured pressure into an electrical signal. Then it is amplified by the amplifier circuit and compensated by the compensation circuit. Finally, it is output in 4-20ma or 0-10ma current mode. Sino-Inst offers over 10 Ultrasonic Liquid Level Controllers for level measurement. About 50% of these are fuel level meters, 40% is the tank level sensor.
The advantages of ultrasonic liquid level gauge are very outstanding. It is mainly reflected in the following aspects : Adopt non-contact measurement. It is not easily affected by the viscosity and density of the liquid. Of course, the ultrasonic liquid level gauge also has its own limitations and insurmountable defects. Specifically, it is mainly manifested in: There is a blind spot in the ultrasonic liquid level measurement. The dead zone is the area where the meter cannot measure. During the transmission of ultrasonic pulses, a small area near the ultrasonic transducer usually cannot receive sound waves. The blind zone where sound waves cannot be received is related to the measurement distance of ultrasonic waves. Generally speaking, the smaller the measurement distance, the smaller the blind zone. The larger the measurement distance, the larger the blind zone.
Due to the non-contact measurement, the measured medium is almost unlimited. It can be widely used to measure the height of various liquid and solid materials. The ultrasonic liquid level transmitter is composed of three parts: ultrasonic transducer, processing unit and output unit. Find additional details on ultrasonic fuel level sensor.
Calibrate the outer wall of the probe. There is no need to open holes for the container to be tested, easy to install, and does not affect production. It can accurately measure the level of various toxic substances, strong acids, strong alkalis and various pure liquids in high-pressure airtight containers. The HS-2000 External Mounted Ultrasonic Tank Level Sensor has no special requirements for the material of the liquid medium and the container. The explosion-proof design is adopted to meet the explosion-proof requirements. Auto-calibration function : With self-calibration function. It overcomes the problem of reduced accuracy after long-term use of traditional liquid level gauges.
What does a level switch do? The function of the liquid level switch is to control the liquid level. For example, the water pump fills the pool with water, and the level switch can make the water in the water tank neither overflow nor empty, and there is always water. “ Can ultrasonic sensor detect water level? The ultrasonic sensor can of course measure the water level. When the ultrasonic level gauge is working, the high-frequency pulse sound wave is emitted by the transducer (probe), and is reflected on the surface of the measured object (water surface). The reflected echo is received by the same transducer (probe) and converted into an electrical signal . The time between pulse sending and receiving (the movement time of the sound wave) is proportional to the distance from the transducer to the surface of the object. Find even more details at https://www.drurylandetheatre.com/.