Piston needle valves manufacturer and supplier with shsuotevalve.com: Flow control valves are used to regulate the flow volume of passing fluid in hydraulic systems. It prevents excessive flow by limiting flow to a preselected maximum rate, regardless of changing line pressure. It is a hydraulically operated, pilot controlled, diaphragm valve. The pilot control responds to the differential pressure produced across an orifice plate installed downstream of the valve. Accurate control is assured as very small changes in the controlling differential pressure produce immediate corrective action of the main valve. Flow rate adjustments are made by turning an adjusting screw on the pilot control. SHSUOTE is the top flow conrtrol valve manufacturer in China, hydraulic flow valves provide precision flow control in 1 direction, and automatically allow unrestricted free flow in opposite direction. The valve includes an orifice plate with a holder that should be installed one to five pipe diameters downstream of the Valve. As a flow control valve supplier, we provide several orifice plate with different hole optional for each size, see the additional table for selection of orifice to guarantee accurate control of flow rate. Contact us for more details! Find additional information on industrial valve company.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
Water Distribution Systems: Altitude valves are commonly used in water distribution systems to control water levels in elevated tanks or reservoirs. They ensure that the tank does not overflow or run dry by automatically adjusting the flow of water into and out of the tank. Irrigation Systems: Altitude valves play a crucial role in maintaining optimal water levels in irrigation systems. They help regulate the flow of water from storage ponds, ensuring that crops receive adequate irrigation without wasting excessive amounts of water. Fire Protection Systems: In fire protection systems, altitude valves help maintain adequate water pressure in standpipes and fire hydrants. This ensures that firefighters have sufficient access to pressurized water during emergencies.
Check valve is a device that allows the flow of fluids to move only in one direction, the primary purpose is prevent backflow in the system. This valve opens when the pressure at the inlet exceeds the outlet pressure. A gradual rate of opening prevents sudden opening surges. SHSUOTE is the best check valve supplier in China,check flow valve can ensure gasses or liquids are flowing in the right direction, and create tight seals to prevent leaks. When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube lines, and the valve closes drip tight. Our check valve also is a hydraulically operated No-slam check valve. As a leading check valve manufacturer since 2004, our hydraulic check control valves adopted rubber disc assures tight sealing, they are ideally suited for use where a positive shutoff is required. The velocity of Open/Shutoff can be controlled by the ball valve on the outlet control tube line. Discover even more details on https://www.shsuotevalve.com/.
How do Altitude Valves Work? Altitude valves play a crucial role in maintaining water levels in storage tanks, preventing overflows and ensuring a steady supply. But how exactly do these valves work their magic? At its core, an altitude valve operates based on the principle of hydrostatic pressure. When the water level in the tank drops below a certain threshold, the valve opens to allow water from the main supply to enter and replenish it. Once the desired level is reached, the valve closes again. This process is made possible by two key components: a float mechanism and a control pilot. The float mechanism senses changes in water level inside the tank and relays this information to the control pilot. The control pilot then regulates whether or not to open or close the valve based on this input.
The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.